THĂNG LONG AUDIO : Nơi hội tụ thương hiệu âm thanh chuyên nghiệp hàng đầu thế giới.

Amplifier DK Audio TP 13

Mã SP: TP13 | (0 đánh giá)
  • Mô tả
    sản phẩm
  • Bình luận
    đánh giá

Amplifier DK Audio TP 13 có Frequency response (1W, 8ohms) 6.8Hz-34kHz

Liên hệ

ĐẶC ĐIỂM NỔI BẬT SẢN PHẨM

Precise rectification and maintain a stable voltage to ensure that even in the supply voltage of a significant decline in the time is still able to meet the full power output and no distortion of the sound. It integrates the efficiency of class D power amplifier with the pure tone quality of class B amplifier. The audio signal has been in a state of simulation, without entering the high frequency switching part of the circuit, and the ripple effect of the filter is avoided.

The adjustable gain makes the best performance of any input signal. According to different types of load optimal output characteristics. High efficiency and uniform cooling: to increase the heat dissipation area from the two variable speed fan. The output member is mounted in a horizontal installation with respect to the heat dissipating airflow in order to achieve the purpose of uniform cooling.

Secure circuit protection features: output DC, short circuit, durable high frequency signal (VHF), and open circuit. In addition, the average power limit (PAL) monitors the current relationship between the power output and the power input, limiting the current when necessary to prevent the phenomenon of audio interruption.

The latest generation of TD technology can work well in all of the load, the output frequency response immediately in the low load to 2 euro is still flat output. Output can be bridged, high reliability, and there is no problem of radio frequency interference. The high efficiency of the power amplifier can be in the output of high power while minimizing the requirements of heat, while the sound quality is still AB class. Designed for large concerts, tours, theaters and other professional use, not only has the super stability, but also has a high fidelity sound quality!

Thông số kỹ thuật

Channel number 4CH

8 ohms per channel output power 1300W

4 ohms per channel output power 2100W

2 ohms per channel output power 2500W

8  ohms per two channel bridge output power 4200W

4  ohms per two channel bridge output power 5000W

Gain and audio index VPL:150V 35dB

Total harmonic distortion (1W) /THD+N ()

The total harmonic distortion (1kHz) of the clipping

Signal to noise ratio >112dBA

Separation degree >70dB @1kHz

Frequency response (1W, 8ohms) 6.8Hz-34kHz

Input impedance balanced 10K / non balanced 20K

Input common mode rejection ratio 54dB CMR

Amplifier optional gain selectable 23,26,32,35,38,41,44dB /Gain, 7 files optional

Level adjustment /Level front panel 31 gear rotary potentiometer, from negative infinity Avenue 0dB

Input interface 3 pin XLR, automatic switching of balanced / unbalanced input

Output interface 4 channels with Neutrik speaker spiral, 2 channel with the terminal

The output bridge mode A+B channel A is the input source, A+B or C+D, A and C are the input source

There is an independent switch on the front panel of the power switch.

Cooling fan, air flow from the former to the rear, the temperature control speed

Refers to the state power amplifier input signal / high resistance; -20dB, -15dB, -10dB and -4dB output signal display; peak voltage limiter (VPL); peak current limiter (CPL); VHF protection (VHF); high temperature; error; mute average power limiter (PLA) 2); power supply

Weight 15KG

Size (width / height / depth):483mm (W), high (H):88mm (2U), equipment depth: 398mm, installation depth: 375mm